[j-nsp] MPC-3D-16XGE-SFPP at 1G speed

[Dave Bell]

Further to this, all documentation I've quickly looked through seems to
indicate its 10G only.

http://www.juniper.net/documentation/en_US/release-independent/junos/topics/reference/general/mpc-16x10ge.html
lists the compatible optics.

On 26 April 2016 at 20:30, Dave Bell <me at geordish.org> wrote:

> I have no idea if you can use 1G optics in this card, but if you can, you
> likely want to configure the interface as ge-0/0/0, instead of xe. This is
> how it works on the EX4200 with the SFP+ module.
>
> Regards,
> Dave
>
> On 26 April 2016 at 20:23, Dave Peters - Terabit Systems <
> Dave at terabitsystems.com> wrote:
>
>> Hi all--
>>
>> Stupid question, here. Can the MPC-3D-16XGE-SFPP run with 1G optics (e.g.
>> EX-SFP-1GE-SX), and if so, is there a specific port setting I need to
>> commit? I'm running an MX480 with 13.3R8.7, and Uncle Google hasn't been
>> too useful, yet.
>>
>> I tried:
>>
>> set interfaces xe-0/0/0 auto-negotiate
>>
>> inserted the EX-SFP-1GE-SX connected to an outside 1G port, no lights, no
>> joy.
>>
>> Any help is appreciated.
>>
>> Thanks much.
>>
>> --Dave Peters
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>
>