[j-nsp] ldp transport address 0.0.0.0

[Alexander Arseniev]

Hello,

Do You have "set routing-options router-id <lo0.0 primary IPv4 @>" line 
in Your config?

Thanks
Alex
On 08/08/2016 12:58, Mohammad Salbad wrote:
> Hi experts
>
> I have mx and acx routers both running isis and rsvp and I have mpls lsp
> configured between their loopbacks.
> when trying to establish ldp and l2circuits it does not work and when I do
> show ldp neighbor details from both sided it gives me trasport address
> 0.0.0.0
> noting that I have almost similar setup in my lab and it is working!
> any ideas what could make the transport address to be 0.0.0.0 while the
> neighbor address is ok?
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp