[j-nsp] ldp transport address 0.0.0.0

Tue Aug 9 07:00:48 EDT 2016

Hi,
  Does each lo0 @ IP is visible via ISIS ?
On 8 Aug 2016 12:59, "Mohammad Salbad" <masalbad at gmail.com> wrote:

> Hi experts
>
> I have mx and acx routers both running isis and rsvp and I have mpls lsp
> configured between their loopbacks.
> when trying to establish ldp and l2circuits it does not work and when I do
> show ldp neighbor details from both sided it gives me trasport address
> 0.0.0.0
> noting that I have almost similar setup in my lab and it is working!
> any ideas what could make the transport address to be 0.0.0.0 while the
> neighbor address is ok?
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>