[j-nsp] ldp transport address 0.0.0.0

[Mohammad Salbad]

yes it is, and as I mentioned before mpls lsp is already up between the acx
and mx and carrying traffic, I want the ldp only between the nodes loopback
addresses for l2circuits and I'm not using it for mpls transport, noting
that I'm using rsvp for signling and mpls transport

On 9 August 2016 at 14:00, BESSALA TSALA Mathurin <besscou at gmail.com> wrote:

> Hi,
>   Does each lo0 @ IP is visible via ISIS ?
> On 8 Aug 2016 12:59, "Mohammad Salbad" <masalbad at gmail.com> wrote:
>
>> Hi experts
>>
>> I have mx and acx routers both running isis and rsvp and I have mpls lsp
>> configured between their loopbacks.
>> when trying to establish ldp and l2circuits it does not work and when I do
>> show ldp neighbor details from both sided it gives me trasport address
>> 0.0.0.0
>> noting that I have almost similar setup in my lab and it is working!
>> any ideas what could make the transport address to be 0.0.0.0 while the
>> neighbor address is ok?
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>