[j-nsp] ldp transport address 0.0.0.0

[Daniel Rohan]

You already check that you're allowing ldp  and rsvp through on your lo0
control plane filter?

On Tuesday, August 9, 2016, Mohammad Salbad <masalbad at gmail.com> wrote:

> yes it is, and as I mentioned before mpls lsp is already up between the acx
> and mx and carrying traffic, I want the ldp only between the nodes loopback
> addresses for l2circuits and I'm not using it for mpls transport, noting
> that I'm using rsvp for signling and mpls transport
>
> On 9 August 2016 at 14:00, BESSALA TSALA Mathurin <besscou at gmail.com
> <javascript:;>> wrote:
>
> > Hi,
> >   Does each lo0 @ IP is visible via ISIS ?
> > On 8 Aug 2016 12:59, "Mohammad Salbad" <masalbad at gmail.com
> <javascript:;>> wrote:
> >
> >> Hi experts
> >>
> >> I have mx and acx routers both running isis and rsvp and I have mpls lsp
> >> configured between their loopbacks.
> >> when trying to establish ldp and l2circuits it does not work and when I
> do
> >> show ldp neighbor details from both sided it gives me trasport address
> >> 0.0.0.0
> >> noting that I have almost similar setup in my lab and it is working!
> >> any ideas what could make the transport address to be 0.0.0.0 while the
> >> neighbor address is ok?
> >> _______________________________________________
> >> juniper-nsp mailing list juniper-nsp at puck.nether.net <javascript:;>
> >> https://puck.nether.net/mailman/listinfo/juniper-nsp
> >>
> >
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net <javascript:;>
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


-- 
Thanks,

Dan