[j-nsp] dhcp not working across lacp link

[Mike Gonnason]

It really should just work. DHCP across layer 2 is a pretty common use case.

What code are you running?

-Mike Gonnason
On Tue, Aug 9, 2016 at 10:34 AM Scott Granados <scott at granados-llc.net>
wrote:

> Do you have any config snippets?  Sounds pretty straight forward, maybe
> someone knows something obvious that I don’t but config pieces may shed
> some light.
>
> > On Aug 9, 2016, at 1:30 PM, joe mcguckin <joe at via.net> wrote:
> >
> > Ok, test setup is 2) ex2200 switched, reset back to factory defaults.
> >
> > Configuring a 2 port trunked LAG between the switches results in dhcp
> not working across the link. Regular web traffic seems ok.
> > Is there some magic command  make this work?
> >
> > Thanks,
> >
> > Joe
> >
> >
> > Joe McGuckin
> > ViaNet Communications
> >
> > joe at via.net
> > 650-207-0372 cell
> > 650-213-1302 office
> > 650-969-2124 fax
> >
> >
> >
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp