[j-nsp] Origin Validation on MX80

[Mark Tinka]

On 17/Aug/16 16:46, Brad Fleming wrote:

> Hello all,
>
> We’ve been playing around a bit with BGP origin validation on a lab MX80.
> While everything seems to work CPU load is pretty high. We’ve observed this
> elevated CPU with both 14.3R<something> and 16.1R1.7. Just wondering if
> anyone else experienced similar or whether we’ve configured something
> sideways and caused a problem.

We have RPKI enabled on our MX routers (including the MX80), but not
performing any policy.

Does your CPU utilization reduce if you disable the policies that work
on RPKI?

Mark.