[j-nsp] MPC-3D-16XGE-SFP

[Josh Reynolds]

Is it actually SFPP? If so, I've had a couple of these. With a regular SCB
you can only run line rate on 12 ports. With the enhanced SCB you can run
line rate on all 16, if memory serves. Supports GE and 10G SFP modules.

I don't know about any warnings or concerns on your chassis as I ran these
on MX960's.

On Aug 31, 2016 5:33 PM, "John Brown" <john at citylinkfiber.com> wrote:

 Hi,

I've received some pretty good pricing on the MPC-3D-16XGE-SFP card,
and was wondering what the list.wisdom is ??

We are an ISP.....  That will be the usage.
Some ports will have BGP, many will be static routed.

Will this run full line rate on all 16 ports ?
Can I run multiple ISP type clients on this card ?

What should I worry about ?

Going into a MX480 chassis with MPC2 and MPC3 cards existing.

Thanks
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp