[j-nsp] MPC-3D-16XGE-SFP

[Dragan Jovicic]

Those are specifically 10G ports not 1G.
We run these on some of our MX960 and MX480, both toward core and edge.
They are fine high density 10G cards.

Things to note. Card has 4 PFE; each MQ chip is good for ~70Gbps give or
take +/- 10Gbps depending on packet sizes.
This packet memory bandwidth is shared between both wan-facing and
fabric-facing ports.

Meaning, if you run wan-fabric traffic you get 35Gbps max. If you run
wan-wan traffic you can get near line-rate (this is how fabricless mx80
gets ~80Gbps).

This is the definition of "full line rate" with these MPC2 cards.

Regards

Dragan


On Thu, Sep 1, 2016 at 12:39 AM, Josh Reynolds <josh at kyneticwifi.com> wrote:

> Is it actually SFPP? If so, I've had a couple of these. With a regular SCB
> you can only run line rate on 12 ports. With the enhanced SCB you can run
> line rate on all 16, if memory serves. Supports GE and 10G SFP modules.
>
> I don't know about any warnings or concerns on your chassis as I ran these
> on MX960's.
>
> On Aug 31, 2016 5:33 PM, "John Brown" <john at citylinkfiber.com> wrote:
>
>  Hi,
>
> I've received some pretty good pricing on the MPC-3D-16XGE-SFP card,
> and was wondering what the list.wisdom is ??
>
> We are an ISP.....  That will be the usage.
> Some ports will have BGP, many will be static routed.
>
> Will this run full line rate on all 16 ports ?
> Can I run multiple ISP type clients on this card ?
>
> What should I worry about ?
>
> Going into a MX480 chassis with MPC2 and MPC3 cards existing.
>
> Thanks
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>