[j-nsp] Throughput testing tools on Juniper?

[Shanawaz]

Hi Tomasz,

We are looking to run the test on a few different MX platforms (5, 80, 240,
480, 960)



On Thu, Feb 4, 2016 at 6:43 PM, Tomasz Mikołajek <tmikolajek at gmail.com>
wrote:

> Hi.
> You can configure rfc 2544 test. What Juniper device you have?
>
>
> W dniu czwartek, 4 lutego 2016 Shanawaz <shanawaz at gmail.com> napisał(a):
>
>> Hey Folks,
>>
>> Are there any tools similar to iperf (or ttcp on cisco) that we can run
>> between 2 Juniper routers (from the CLI or the shell) to test throughput
>> between the 2 devices?
>>
>> We are suspecting a hard rate-limit placed in an upstream ISP segment
>> between the 2 devices. It would be nice just to test between the routers
>> at
>> both ends of the ISP segment rather than using machines that are a few
>> more
>> subnets away.
>>
>> Thanks,
>> Shan
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>