[j-nsp] MX960 2x MS-MPC-128

[Chuck Anderson]

Not enough power to power up the card?

show chassis power

On Fri, Feb 26, 2016 at 01:50:44PM -0600, Josh Reynolds wrote:
> Hi all.
> 
> Pair of MS-MPC-128's. 1st card boots, second card doesn't. Swapped FPC
> locations, now the 2nd card boots in the first card's spot, but the
> 1st card won't boot in the previous spot of the 2nd card. Have tried
> several other slots for the 2nd card the with same results.
> 
> show chassis hardware recognizes the MS-MPC-128 is installed, but no
> power. request chassis fpc online slot X shows: "Online initiated, use
> "show chassis fpc" to verify", but "show chassis fpc" still shows it's
> powered off.
> 
> What gives?
> 
> Thanks