[j-nsp] MX960 2x MS-MPC-128

[Josh Reynolds]

4 High Output AC supplies, only 3 16x10Gbps cards installed with no
optics in them yet

Power is okay, it's not doing anything yet :P Good idea though!

On Fri, Feb 26, 2016 at 2:14 PM, Chuck Anderson <cra at wpi.edu> wrote:
> Not enough power to power up the card?
>
> show chassis power
>
> On Fri, Feb 26, 2016 at 01:50:44PM -0600, Josh Reynolds wrote:
>> Hi all.
>>
>> Pair of MS-MPC-128's. 1st card boots, second card doesn't. Swapped FPC
>> locations, now the 2nd card boots in the first card's spot, but the
>> 1st card won't boot in the previous spot of the 2nd card. Have tried
>> several other slots for the 2nd card the with same results.
>>
>> show chassis hardware recognizes the MS-MPC-128 is installed, but no
>> power. request chassis fpc online slot X shows: "Online initiated, use
>> "show chassis fpc" to verify", but "show chassis fpc" still shows it's
>> powered off.
>>
>> What gives?
>>
>> Thanks