[j-nsp] MX960 2x MS-MPC-128

[Giuliano Medalha]

The PS are in high power mode ?  Position 0 

Sent from my iPhone

> On Feb 26, 2016, at 17:19, Josh Reynolds <josh at kyneticwifi.com> wrote:
> 
> 4 High Output AC supplies, only 3 16x10Gbps cards installed with no
> optics in them yet
> 
> Power is okay, it's not doing anything yet :P Good idea though!
> 
>> On Fri, Feb 26, 2016 at 2:14 PM, Chuck Anderson <cra at wpi.edu> wrote:
>> Not enough power to power up the card?
>> 
>> show chassis power
>> 
>>> On Fri, Feb 26, 2016 at 01:50:44PM -0600, Josh Reynolds wrote:
>>> Hi all.
>>> 
>>> Pair of MS-MPC-128's. 1st card boots, second card doesn't. Swapped FPC
>>> locations, now the 2nd card boots in the first card's spot, but the
>>> 1st card won't boot in the previous spot of the 2nd card. Have tried
>>> several other slots for the 2nd card the with same results.
>>> 
>>> show chassis hardware recognizes the MS-MPC-128 is installed, but no
>>> power. request chassis fpc online slot X shows: "Online initiated, use
>>> "show chassis fpc" to verify", but "show chassis fpc" still shows it's
>>> powered off.
>>> 
>>> What gives?
>>> 
>>> Thanks
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp