[j-nsp] Help with routing-instance bgp session

[Eduardo Schoedler]

Hi Aaron,

Perhaps can I do this using rib-groups within bgp neighbor family inet
unicast knob?

I also tried declare bgp neighbor in main table, but even leaking
connected routes, they say "No route to host" but the routes are
there.

Thanks.

2016-07-05 0:07 GMT-03:00 Aaron Dewell <aaron.dewell at gmail.com>:
>
> The routes have to exist in the table in order to be available to a policy.  So you’ll have to leak them first.
>
> Any policy only has access to the routes within it’s context.
>
> You could route them to discard after they are leaked however.  That way, they still exist even if they are inactive.  (see the advertise-inactive knob).
>
>> On Jul 4, 2016, at 9:02 PM, Eduardo Schoedler <listas at esds.com.br> wrote:
>>
>> Can I announce all prefixes from main table in a bgp session that is
>> into a routing-instance? I can't leak the prefixes, only advertise
>> them, because it's a looking glass session, like Routeviews.
>>
>> All tips are welcome.
>>
>> Thank you.
>>
>> Regards,
>>
>> --
>> Eduardo Schoedler
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
Eduardo Schoedler