[j-nsp] SNMP access to default RI when lo0.0 is inside a VRF

[Olivier Benghozi]

Poll the router using "@yourcommunity"

> Le 20 juil. 2016 à 18:22, Jason Lixfeld <jason-jnsp at lixfeld.ca> a écrit :
> 
> I have an EX9204 running 14.2R4.9.  I’m accessing the box in-band via lo0 which is configured inside a management routing-instance (VRF).  My SNMP management station also lives within the same routing-instance inside the MPLS cloud of which this routing-instance participates.
> 
> My understanding is that in order for my management station to have SNMP access to be box, I need to configure the routing-instance inside a SNMP community, however when doing so, SNMP access for some things is limited to the scope of the routing instance only, and I need full visibility to the system from my management station.
> 
> Is this possible?