[j-nsp] ACX50xx l2circuit counters
Giuliano Medalha
giuliano at wztech.com.br
Tue Jun 21 14:27:10 EDT 2016
Good !!!
Lets share here on this list any new details about configuration, ok ?
Are you using D50 version ? It is pretty stable right now to us.
But we are asking for the development a lot of new features and they are
listening to us.
Thanks a lot,
Att,
Giuliano
Giuliano Cardozo Medalha
Systems Engineer
+55 (17) 3011-3811
+55 (17) 98112-5394
JUNIPER J-PARTNER ELITE
giuliano at wztech.com.br
http://www.wztech.com.br/
WZTECH is registered trademark of WZTECH NETWORKS.
Copyright © 2016 WZTECH NETWORKS. All Rights Reserved.
IMPORTANTE:
As informações deste e-mail e o conteúdo dos eventuais documentos anexos
são confidenciais e para conhecimento exclusivo do destinatário. Se o
leitor desta mensagem não for o seu destinatário,
fica desde já notificado de que não poderá divulgar, distribuir ou, sob
qualquer forma, dar conhecimento a terceiros das informações e do conteúdo
dos documentos anexos. Neste caso, favor comunicar imediatamente
o remetente, respondendo este e-mail ou telefonando ao mesmo, e em seguida
apague-o.
CONFIDENTIALITY NOTICE:
The information transmitted in this email message and any attachments are
solely for the intended recipient and may contain confidential or
privileged information. If you are not the intended recipient, any review,
transmission, dissemination or other use of this information is
prohibited. If you have received this communication in error, please notify
the sender immediately and delete the material from any computer, including
any copies.
On Tue, Jun 21, 2016 at 3:24 PM, Aaron <aaron1 at gvtc.com> wrote:
>
>
> Hey , that worked , thanks ! seems that I have to do it at the unit
> level, I didn’t see that I could do it on the phy int level.
>
>
>
> {master:0}
>
> agould at blcn-h-5048> show interfaces ge-0/0/36 | grep pack
>
> Input packets : 33
>
> Output packets: 0
>
>
>
> {master:0}
>
> agould at blcn-h-5048> show interfaces ge-0/0/36 | grep pack
>
> Input packets : 33
>
> Output packets: 0
>
>
>
> {master:0}
>
> agould at blcn-h-5048> show interfaces ge-0/0/36 | grep pack
>
> Input packets : 33
>
> Output packets: 0
>
>
>
> {master:0}
>
> agould at blcn-h-5048> show interfaces ge-0/0/36 | grep pack
>
> Input packets : 33
>
> Output packets: 0
>
>
>
> {master:0}
>
> agould at blcn-h-5048> show interfaces ge-0/0/36 | grep pack
>
> Input packets : 33
>
> Output packets: 0
>
>
>
> {master:0}
>
> agould at blcn-h-5048> configure
>
> Entering configuration mode
>
>
>
> {master:0}[edit]
>
> agould at blcn-h-5048# set interfaces ge-0/0/36 unit 0 statistics
>
>
>
> {master:0}[edit]
>
> agould at blcn-h-5048# commit
>
> configuration check succeeds
>
> commit complete
>
>
>
> {master:0}[edit]
>
> agould at blcn-h-5048# exit
>
> Exiting configuration mode
>
>
>
> {master:0}
>
> agould at blcn-h-5048> show interfaces ge-0/0/36.0 | grep pack
>
> Input packets : 18232
>
> Output packets: 2
>
>
>
> {master:0}
>
> agould at blcn-h-5048> show interfaces ge-0/0/36.0 | grep pack
>
> Input packets : 20857
>
> Output packets: 2
>
>
>
>
>
>
>
>
>
>
>
> *From:* Giuliano Medalha [mailto:giuliano at wztech.com.br]
> *Sent:* Monday, June 20, 2016 4:40 PM
> *To:* Aaron <aaron1 at gvtc.com>
> *Cc:* Nathan Ward <juniper-nsp at daork.net>; jnsp list <
> juniper-nsp at puck.nether.net>
> *Subject:* Re: [j-nsp] ACX50xx l2circuit counters
>
>
>
> Hum ... I think in ACX you will need to explicit use statistics command ...
>
> set interfaces xe-0/0/1 statistics
>
>
> Giuliano Cardozo Medalha
> Systems Engineer
> +55 (17) 3011-3811
>
> +55 (17) 98112-5394
> JUNIPER J-PARTNER ELITE
> giuliano at wztech.com.br
> http://www.wztech.com.br/
>
>
>
>
> WZTECH is registered trademark of WZTECH NETWORKS.
> Copyright © 2016 WZTECH NETWORKS. All Rights Reserved.
>
> IMPORTANTE:
> As informações deste e-mail e o conteúdo dos eventuais documentos anexos
> são confidenciais e para conhecimento exclusivo do destinatário. Se o
> leitor desta mensagem não for o seu destinatário,
> fica desde já notificado de que não poderá divulgar, distribuir ou, sob
> qualquer forma, dar conhecimento a terceiros das informações e do conteúdo
> dos documentos anexos. Neste caso, favor comunicar imediatamente
> o remetente, respondendo este e-mail ou telefonando ao mesmo, e em seguida
> apague-o.
>
>
> CONFIDENTIALITY NOTICE:
>
> The information transmitted in this email message and any attachments are
> solely for the intended recipient and may contain confidential or
> privileged information. If you are not the intended recipient, any review,
> transmission, dissemination or other use of this information is
> prohibited. If you have received this communication in error, please notify
> the sender immediately and delete the material from any computer, including
> any copies.
>
>
>
> On Mon, Jun 20, 2016 at 6:37 PM, Aaron <aaron1 at gvtc.com> wrote:
>
> Yeah, strange my subinterface doesn't show any packets out, but the phy
> int shows currently 17 mbps going out right now...
>
> Maybe these counters are broken on the subint... I tried walking with snmp
> but I still didn't see any traffic for the subinterface used on the
> l2circuit
>
> agould at blcn-h-5048> show interfaces ge-0/0/12 statistics
> Physical interface: ge-0/0/12, Enabled, Physical link is Up
> Interface index: 650, SNMP ifIndex: 521
> Link-level type: Ethernet-CCC, MTU: 1514, LAN-PHY mode, Speed: 1000mbps,
> BPDU Error: None, MAC-REWRITE Error: None, Loopback: Disabled,
> Source filtering: Disabled, Flow control: Disabled, Auto-negotiation:
> Enabled, Remote fault: Online, Media type: Copper
> Device flags : Present Running
> Interface flags: SNMP-Traps Internal: 0x4000
> Link flags : None
> CoS queues : 8 supported, 8 maximum usable queues
> Current address: 20:4e:71:45:12:34, Hardware address: 20:4e:71:45:12:34
> Last flapped : 2016-05-25 14:38:24 CDT (3w5d 01:55 ago)
> Statistics last cleared: Never
> Input rate : 17802616 bps (1633 pps)
> Output rate : 0 bps (0 pps)
> Input errors: 0, Output errors: 0
> Active alarms : None
> Active defects : None
> Interface transmit statistics: Disabled
>
> Logical interface ge-0/0/12.0 (Index 557) (SNMP ifIndex 523)
> Flags: Up SNMP-Traps 0x4004000 Encapsulation: Ethernet-CCC
> Input packets : 68
> Output packets: 0
> Protocol ccc, MTU: 1514
> Flags: Is-Primary
>
> {master:0}
>
> agould at blcn-h-5048> show l2circuit connections brief
> Layer-2 Circuit Connections:
>
> Legend for connection status (St)
> ....
>
> Legend for interface status
> Up -- operational
> Dn -- down
> Neighbor: 10.101.0.1
> Interface Type St Time last up # Up trans
> ge-0/0/12.0(vc 1) rmt Up May 25 14:38:24 2016 1
>
>
> - Aaron
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
>
More information about the juniper-nsp
mailing list