[j-nsp] Sending iBGP prefixes to another iBGP neighbour
Chris Kawchuk
juniperdude at gmail.com
Thu May 5 20:57:05 EDT 2016
let me fix my errors: I mean tot say L3VPN not L2 ;)
___________________________
If you put the Linux session into a VRF on the MX104, then run *L3VPN* between the MX104 and MX80, (may have to enable the independent-domain knob in the vrf), you can solve it that way too..
however the egress interface on the MX80 also needs to be in the VRF.
Topology:
iBGP(Linux) -> (VRF)MX104 -> L3VPN/iBGP/MPLS -> MX80(VRF) -> eBGP
- CK.
On 6 May 2016, at 2:37 am, Mike Williams <mike.williams at comodo.com> wrote:
> Hey all,
>
> I could very well either be doing this completely wrong, or attempting to do
> the impossible, but...
>
> We have BIRD on Linux using BGP to send prefixes to the MX104 over a direct
> connection, I need to send those prefixes to an MX80 directly connected to the
> 104.
>
> At the 104 end of the 104<->80 peering there is just an export policy, that
> simply matches on "from protocol bgp" and the BGP community assigned the
> prefixes I want, then accept and next-hop self.
More information about the juniper-nsp
mailing list