[j-nsp] Stm1 to ethernet

[Saku Ytti]

On 18 May 2016 at 10:18, Mark Tinka <mark.tinka at seacom.mu> wrote:
> IIRC, you can only transport IPv4 traffic when interworking different
> Layer 2 protocols. I recall only doing this on Cisco, so not sure
> whether Juniper have the same limitation. I think Juniper call this TCC
> (Translational Cross Connect).

I know you can interwork ethernet between ATM and Ethernet., but I
believe that support was dropped from MX.

-- 
  ++ytti