[j-nsp] ACX for subscriber aggregation

Mark Tinka mark.tinka at seacom.mu
Tue Nov 1 01:18:58 EDT 2016



On 31/Oct/16 23:43, Ross Halliday wrote:

> Hi list,
>
> We run a bunch of fixed wireless broadband towers where we bring MPLS right to the site. Subscribers are terminated right there. Today we use Cisco 7301 in a PPPoE LAC capacity for dynamic subscribers and deal with BGP sessions to higher end customers that have managed CE.
>
> We're looking at the ACX1100 to replace said 7301 and additional switches. Because of the lack of PPPoE-related features we're considering using DHCP for subscriber access. 
>
> Does anyone have any experience with the ACX routers doing this kind of thing? Particularly the DHCP relay side, features supported in IRBs, and practical experience with the MPLS features is what I'm wondering about. We'd load it up with maybe half a dozen VRFs.

ACX as a BNG, hmmmh...

Why don't you go virtual instead, e.g., vMX, CSR1000v or XRv?

Mark.


More information about the juniper-nsp mailing list