[j-nsp] ACX for subscriber aggregation

[Daniel Rohan]

Ross,

You might want to try searching the archives for ACX. A few of us have
posted the good, the bad, the ugly.

TL;DR: look at the ASR920.

Dan

On Monday, October 31, 2016, Ross Halliday <
ross.halliday at wtccommunications.ca> wrote:

> Hi list,
>
> We run a bunch of fixed wireless broadband towers where we bring MPLS
> right to the site. Subscribers are terminated right there. Today we use
> Cisco 7301 in a PPPoE LAC capacity for dynamic subscribers and deal with
> BGP sessions to higher end customers that have managed CE.
>
> We're looking at the ACX1100 to replace said 7301 and additional switches.
> Because of the lack of PPPoE-related features we're considering using DHCP
> for subscriber access.
>
> Does anyone have any experience with the ACX routers doing this kind of
> thing? Particularly the DHCP relay side, features supported in IRBs, and
> practical experience with the MPLS features is what I'm wondering about.
> We'd load it up with maybe half a dozen VRFs.
>
>
> Thanks!
> Ross
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net <javascript:;>
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


-- 
Thanks,

Dan