[j-nsp] EX4600 : Ping problem

[Doug McIntyre]

On Tue, Nov 29, 2016 at 10:32:15AM +1100, Dale Shaw wrote:
> On 29 November 2016 at 08:35, Eduardo Schoedler <listas at esds.com.br> wrote:
> >
> > Here on EX2200 I put ip address directly in the vlan.
> >
> > Try this:
> >
> > set interfaces vlan unit xxx family inet address 10.x.x.x/24
> > set vlans vlan-RESEAUX l3-interface vlan.xxx
> > set interfaces ge-0/x/x unit 0 family ethernet-switching vlan members
> > vlan-RESEAUX
> 
> EX4600 runs Enhanced Layer 2 Software (ELS), so it's correct to use "irb.n"
> vs. "vlan.n"
...

As of JunOS 13.2X51-D25.. If you run the JTAC suggested 12.3 on this
platform it does not yet use ELS...