[j-nsp] MX240+QFX5100 using Fusion - Any positive experience

[Alain Hebert]

     Hi,

     I'm thinking our local Juniper vendor is taking us for his personal 
Q&A...

Another tech sold to us instead of VCF: Fusion.

     Anyone got it working on MX240+QFX5100...


Config:

     < basic satellite config >

     set interfaces ge-102/0/20 unit 0 family inet address 10.25.1.13/31


Test:

     Every time I try to ping .12, I get this log.

Aug 10 07:49:56  <snip> fpc2 KERNEL/PFE APP=NH OUT OF SYNC: error code 3 
REASON: NH add received for an ifl that does not exist ERROR-SPECIFIC 
INFO: nh_id=684 , type = Hold, ifl index 348 does not exist  
TYPE-SPECIFIC INFO: none


What we looked at:

     1. Yes everything was rebooted;

     2. Yes The satellite look fine;

     3. Yes the latest firmware is on the MX and the QFX;

         MX: junos-install-mx-x86-32-17.2R1.13.tgz

         QFX: satellite-3.1R1.3-signed.tgz since satellite-3.1R1.4.tgz 
is not signed so it cannot be installed.

     4. Yes the optic are the same that those working in our QFX Junos 
native;

     And no amount of GoogleFu could find a solution.  Our next step is 
JTAC.

-- 
-----
Alain Hebert                                ahebert at pubnix.net
PubNIX Inc.
50 boul. St-Charles
P.O. Box 26770     Beaconsfield, Quebec     H9W 6G7
Tel: 514-990-5911  http://www.pubnix.net    Fax: 514-990-9443