[j-nsp] MX240+QFX5100 using Fusion - Any positive experience

[santiago martinez]

Hi there, which MPC are you using. We have fusion edge on our lab with mx104 and no problem so far.

We have a mx240 , if we have the same MPC I guess I can give it a try.

Can you share your chassis config /  show chassis satellite output / show interface ge-102/0/20

Santi



Sent from my iPhone

> On 10 Aug 2017, at 13:08, Alain Hebert <ahebert at pubnix.net> wrote:
> 
>    Hi,
> 
>    I'm thinking our local Juniper vendor is taking us for his personal Q&A...
> 
> Another tech sold to us instead of VCF: Fusion.
> 
>    Anyone got it working on MX240+QFX5100...
> 
> 
> Config:
> 
>    < basic satellite config >
> 
>    set interfaces ge-102/0/20 unit 0 family inet address 10.25.1.13/31
> 
> 
> Test:
> 
>    Every time I try to ping .12, I get this log.
> 
> Aug 10 07:49:56  <snip> fpc2 KERNEL/PFE APP=NH OUT OF SYNC: error code 3 REASON: NH add received for an ifl that does not exist ERROR-SPECIFIC INFO: nh_id=684 , type = Hold, ifl index 348 does not exist  TYPE-SPECIFIC INFO: none
> 
> 
> What we looked at:
> 
>    1. Yes everything was rebooted;
> 
>    2. Yes The satellite look fine;
> 
>    3. Yes the latest firmware is on the MX and the QFX;
> 
>        MX: junos-install-mx-x86-32-17.2R1.13.tgz
> 
>        QFX: satellite-3.1R1.3-signed.tgz since satellite-3.1R1.4.tgz is not signed so it cannot be installed.
> 
>    4. Yes the optic are the same that those working in our QFX Junos native;
> 
>    And no amount of GoogleFu could find a solution.  Our next step is JTAC.
> 
> -- 
> -----
> Alain Hebert                                ahebert at pubnix.net
> PubNIX Inc.
> 50 boul. St-Charles
> P.O. Box 26770     Beaconsfield, Quebec     H9W 6G7
> Tel: 514-990-5911  http://www.pubnix.net    Fax: 514-990-9443
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp