[j-nsp] vlan-ccc between ACX5048 and EX4500

[Enoch Nyatoti]

Hi,
Can you try the following on your ACX5048 interface:
  set interfaces xe-0/0/46.517input-vlan-map popset interfaces xe-0/0/46.517output-vlan-map push 
 Best regards
Enoch Nyatoti




On Wednesday, August 23, 2017, 7:51:21 AM GMT+1, Jay Hanke <jayhanke at gmail.com> wrote:

I'm having an issue where I'm unable to pass traffic through a
vlan-ccc between an ACX5048 and an EX4500. Other circuits on same
boxes are working fine. The other circuits are ACX to ACX and EX to
EX.

PE1 (ex4500)


l2circuit {
    neighbor 10.200.xx.xy {
        interface xe-0/0/1.517 {
            virtual-circuit-id 10000171;
            mtu 9000;
            encapsulation-type ethernet-vlan;
        }
    }
}

xe-0/0/1 {
    vlan-tagging;
    mtu 9216;
    encapsulation vlan-ccc;
    unit 517 {
        encapsulation vlan-ccc;
        vlan-id 517;
    }
}

PE2 (ACX5048):

l2circuit {
    neighbor 10.200.xx.xx {
        interface xe-0/0/46.517 {
            virtual-circuit-id 10000171;
            mtu 9000;
            encapsulation-type ethernet-vlan;
        }
    }
}

xe-0/0/46 {

    vlan-tagging;
    mtu 9216;
    encapsulation flexible-ethernet-services;

    unit 517 {
        encapsulation vlan-ccc;
        vlan-id 517;
    }
}

I'm learning mac-addresses through the link on the PE2 side.

The interface connected on the PE1 side doesn't learn anything.

show l2circuit con shows the PW up on both PE devices.

I've reloaded software on the EX4500 with the same result. There is
one P router between the PE devices.

All my existing PW are between EX4500 or between ACX. We don't have
any working between systems with different models acting as PE
devices. But quite a few working where PE devices are the same type.

Any ideas?

Jay
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp