[j-nsp] About Juniper load balacing beween two PE router and two CE router through multipath

[Md. Jahangir Hossain]

Dear all ,  

I'm trying to test the load balancing of two links where two CE routers connected with two PE routers and load balancing of two links between PE to CE . 
I have configured a routing instance named AAA and found that routing table information of AAA.inet.0 is not present in inet.0 so that IBGP 
between PE1 and PE2 not passing CE routing information each other trough iBGP . I think i need to  import routing table from AAA.inet0 (vrf instance)  to  inet.0 .  
Besides i have found a same scenario in bellow link  but problem to insert route from routing instance (AAA.inet0) to inet.0 

https://www.juniper.net/documentation/en_US/junose15.1/topics/example/simple/mbgp-vpn-enable-ebgp-ecmp.html
if you have any suggestion and more information to resolve this load balancing problem then it would be appreciate .


Regards / Jahangir