[j-nsp] how to send SRX240 traffic/session logs to syslog server

[Jed Laundry]

Hi Aaron,

Have you enabled logging on each policy you're interested in? I.e.:

then {
    permit;
    log {
        session-init;
        session-close;
    }

Thanks,
Jed.

--


On Tue, 20 Jun 2017 at 09:29, Aaron Gould <aaron1 at gvtc.com> wrote:

> Thanks Mike, Per the web link I tried the following but still don’t see
> session/flow logs from the SRX…
>
>
>
> set security log stream log3 format welf category content-security host
> 10.51.16.9
>
> set security log source-address 1.2.3.4
>
>
>
> -Aaron
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp