[j-nsp] ACX500 PTP grandmaster

[Carsten Pettersson]

Hi folks,

I am trying to get an ACX500 to act as PTP master clock, for timing of E1 over MPLS.

according to the datasheets:

https://www.juniper.net/assets/kr/kr/local/pdf/datasheets/1000397-en.pdf

The ACX500, ACX500-O, and ACX500-O-PoE also provide an integrated GPS receiver and can act as grandmaster (GM) clock for a distributed PTP implementation, making them an ideal choice for the aggregation of small cell traffic when the backhaul is transported over the Internet.

Does anyone have a succesful configuration for this? I am also struggling to find information of how to utilise the antenna port on the ACX? 

Any help is appreciated.

--
Carsten Pettersson, Senior Network Specialist, IP
www.globalconnect.dk | cap at globalconnect.dk | tel: +45 3125 6595