[j-nsp] ACX500 PTP grandmaster

Roger Wiklund roger.wiklund at gmail.com
Wed Mar 15 05:32:57 EDT 2017


I have not done it myself, but here's a guide if you have not seen it:

http://www.juniper.net/techpubs/en_US/junos/topics/task/configuration/ptp-gm-clock-acx-series.html



On Tue, Mar 14, 2017 at 5:43 PM, Carsten Pettersson
<carsten at petterssons.dk> wrote:
> Hi folks,
>
> I am trying to get an ACX500 to act as PTP master clock, for timing of E1 over MPLS.
>
> according to the datasheets:
>
> https://www.juniper.net/assets/kr/kr/local/pdf/datasheets/1000397-en.pdf
>
> The ACX500, ACX500-O, and ACX500-O-PoE also provide an integrated GPS receiver and can act as grandmaster (GM) clock for a distributed PTP implementation, making them an ideal choice for the aggregation of small cell traffic when the backhaul is transported over the Internet.
>
> Does anyone have a succesful configuration for this? I am also struggling to find information of how to utilise the antenna port on the ACX?
>
> Any help is appreciated.
>
> --
> Carsten Pettersson, Senior Network Specialist, IP
> www.globalconnect.dk | cap at globalconnect.dk | tel: +45 3125 6595
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp


More information about the juniper-nsp mailing list