[j-nsp] It is about cisco command

[Christian Scholz]

There is no such way to "test before apply " in Cisco. Thats one reason to choose Juniper ;)
You could Create a Lab-Environment to test such things or test this virtually with Cisco VIRL. Besides that there is no way because as you wrote - Cisco will take everything and fires it live...
RegardsChris


-------- Ursprüngliche Nachricht --------Von: Brijesh Patel <brju.patel at gmail.com> Datum: 21.03.17  22:13  (GMT+01:00) An: Saku Ytti <saku at ytti.fi> Cc: juniper-nsp at puck.nether.net Betreff: Re: [j-nsp] It is about cisco command 
Hi Saku,

Thanks for your response.

In juniper* test *command will test before apply to neighbour

Where in cisco , once you implement command go into nvram so bit not give
answer.

Regards,

Brijesh Patel


On Tue, Mar 21, 2017 at 8:00 PM, Saku Ytti <saku at ytti.fi> wrote:

> Hey,
>
> > *Juniper>test policy CUSTOMER-BGP-ABC-Consultancy-V4 192.168.x.y/24 *
> >
> > *Is there any command in cisco to test roue-map and prefix-list. *
>
> Pretty sure best you get is 'show ip bgp route-map XYZ'
>
> --
>   ++ytti
>
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp