[j-nsp] MACsec over a service provider

[Alex K.]

* As long as you have pure p2p links, you should be fine - Juniper gear
meant.

בתאריך 18 בנוב' 2017 1:20 AM,‏ "Alex K." <nsp.lists at gmail.com> כתב:

> Yes,
>
> But unfortunately (as far as j-nsp is considered), using Ciscos' gear.
>
> Cisco has a special flavor of MACSec, intended to address that issue
> exactly - they call it WAN MACSes. We was able to use across many different
> SP circuits. As long as you have pure p2p links (real or stimulated), you
> should be fine. Unfortunately, I'm not aware of any similar Juniper
> technique.
>
> Best regards,
> Alex.
>
> בתאריך 27 באוק' 2017 5:23 PM,‏ "Chuck Anderson" <cra at wpi.edu> כתב:
>
> Has anyone been able to run MACsec over a service provider's Ethernet
> Private Line (or even just a 802.1q vlan)?  I'm looking at using 10gig
> ports on the EX4300 or the EX4600/QFX5100-24Q with the MACsec uplink
> module.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
>