[j-nsp] ACX5048 - 40 gbps ER 40 km optic

[Alexandre Guimaraes]

Aaron,

   I use them, yes, not in the lab, in the real world, the distance is 37km.

   40Km transceiver use high power, much more than 10km transceivers, you have to attenuate to decrease power and fit the threshold.
Use “show interface diagnostic optics et-0/0/x” to check the levels.

    The acx or any other Juniper switch will disable the interface if the signal does not match the threshold.

att
Alexandre

Em 4 de out de 2017, à(s) 21:04, Aaron Gould <aaron1 at gvtc.com<mailto:aaron1 at gvtc.com>> escreveu:

Well, when the transport eng I work with found out that I had these two 40km optics connected with a 3’ jumper he ran into the lab to disconnect it…. So that’s probably why you see no light right now…. Lemme get back into the office Monday and we will go from there… yeah, as I mentioned I’m working with my Juniper account SE on this, so he may update support matrix if he discovers they are good…. I dunno.



Thanks



-Aaron



_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net<mailto:juniper-nsp at puck.nether.net>
https://puck.nether.net/mailman/listinfo/juniper-nsp