[j-nsp] ACX5048 - 40 gbps ER 40 km optic

[Gustavo Santos]

Because of the possibility of out of order packet issues "on per packet"
load balance and a with flow based load balance, a 10Gbps limit per flow.


2017-10-11 22:57 GMT-03:00 Colton Conor <colton.conor at gmail.com>:

> So why go with this then? You could litterally do a passive mux and 4 10G
> colored optics for much much less than that. Check out FS.com
>
> On Tue, Oct 10, 2017 at 4:41 PM, Gustavo Santos <gustkiller at gmail.com>
> wrote:
>
>> Here in Brazil where everything costs a lot more than US because of
>> taxes,  about U$2485 per module.
>>
>> 2017-10-09 23:53 GMT-03:00 Colton Conor <colton.conor at gmail.com>:
>>
>>> How much do those cost? We have used many of the 10KM optics in out
>>> ACX5048, but never the 40KM due to cost. It seems much cheaper to use 4
>>> colored SFP+'s?
>>>
>>> On Mon, Oct 9, 2017 at 8:16 AM, Gustavo Santos <gustkiller at gmail.com>
>>> wrote:
>>>
>>>> Hi,
>>>>
>>>> It's an ER4 , LR4 is just the label precision coded for compatibility.
>>>> The module part name is PRE-QSFP-ER4
>>>>
>>>> 2017-10-04 19:57 GMT-03:00 Aaron Gould <aaron1 at gvtc.com>:
>>>>
>>>> > Hey that’s good to know Gustavo… but LR4 , is that shorter than 40 km
>>>> ?
>>>> >
>>>> >
>>>> >
>>>> > -Aaron
>>>> >
>>>> >
>>>> >
>>>> _______________________________________________
>>>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>>>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>>>
>>>
>>>
>>
>