[j-nsp] Routing Engine upgrade

[craig washington]

Thanks for the feed back.

Below is what we currently have on one of the routers in  question:



show chassis hardware models | match "RE-S|SCB"
Routing Engine 0 REV 15   740-013063   9009083524        RE-S-2000-4096-S
Routing Engine 1 REV 15   740-013063   9009083711        RE-S-2000-4096-S
CB 0             REV 23   750-031391   ABCY2536          SCBE-MX-S
CB 1             REV 23   750-031391   ABCX9327          SCBE-MX-S


________________________________
From: Elijah Zhuravlev <i.zhuravlev at marosnet.ru>
Sent: Thursday, October 19, 2017 9:20 AM
To: Sachin Rai
Cc: craig washington; juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] Routing Engine upgrade

There is no problem with such configuration:

> show chassis hardware models | match "RE-S|SCB"
Routing Engine 0 REV 08   740-031116   9009138697 RE-S-1800X4-16G-S
Routing Engine 1 REV 08   740-031116 9009139183 RE-S-1800X4-16G-S
CB 0    REV 11 710-021523 ZV5305            SCB-MX960-S
CB 1    REV 11 710-021523 ZV5268            SCB-MX960-S
CB 2    REV 11 710-021523 ZV5233            SCB-MX960-S

regards, Eli

On Thu, 19 Oct 2017 04:00:28 +0000
Sachin Rai <sachinrai1983 at hotmail.com> wrote:

> I am assuming this also includes SCB. If that's the case then its ok
> and further you need to check on SCBE (New one) and currently
> installed MPC/DPC compatibility.
>
> If not then please check with Juniper if RE-S-1800x4 supports SCB
> (Old one) (my guess is it will not) and then MPC/DPC compatibility.
>
> ________________________________
> From: juniper-nsp <juniper-nsp-bounces at puck.nether.net> on behalf of
> craig washington <craigwashington01 at hotmail.com> Sent: Wednesday,
> October 18, 2017 10:17:36 PM To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] Routing Engine upgrade
>
> Hello all,
>
>
> Kind of a general question but just wanted to double check any
> gotchas.
>
>
> We are upgrading some of our routers from RE-S-2000 to RE-S-1800x4.
>
> This should just be putting the new on in the backup, letting it sync
> and upgrade software as needed and then doing switch over, then
> performing same step on the primary.
>
> Is there anything that I am missing, are there any odd issues with
> the RE-S-2000 that could cause a crash of some sort?
>
>
> Thanks
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpuck.nether.net%2Fmailman%2Flistinfo%2Fjuniper-nsp&data=02%7C01%7Ca_hadhoud%40hotmail.com%7Ca6f6c638631b4767521908d5166d23fc%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636439580370731950&sdata=8EsFH0DqNhkthRrnN6ITE3r1UvLOapCnaOrpFcYuIoQ%3D&reserved=0
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
juniper-nsp Info Page - puck.nether.net<https://puck.nether.net/mailman/listinfo/juniper-nsp>
puck.nether.net
To see the collection of prior postings to the list, visit the juniper-nsp Archives. Using juniper-nsp: To post a message to all the list members ...


>
> !DSPAM:59e8238c313551197015902!
>
>



--
С уважением, Журавлев Илья
ООО Мароснет, сетевой инженер
+79661797934