[j-nsp] error: the ethernet-link-fault-management subsystem is not running on a QFX5100

[Krasimir Avramski]

CFM is not supported on QFX family.
ACX5K supports this feature.

Best Regards,
Krasi

On 23 October 2017 at 12:39, Vasil Kanev <vasil.kanev at gmail.com> wrote:

> Hi there,
>
> On an QFX5100 VC  i`m trying to configure OAM CFM but when i try to check
> status i got this:
>
> error: the ethernet-connectivity-fault-management subsystem is not running
>
> Here is my config:
>
> {master:0}[edit protocols oam ethernet connectivity-fault-management]
> action-profile LINK_DOWN {
>     default-actions {
>         interface-down;
>     }
> }
> maintenance-domain lab {
>     level 7;
>     name-format character-string;
>     maintenance-association labMA {
>         continuity-check {
>             hold-interval 1;
>         }
>         mep 999 {
>             interface xe-0/0/0.0 vlan 66;
>             direction down;
>             auto-discovery;
>         }
>     }
> }
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>