[j-nsp] error: the ethernet-link-fault-management subsystem is not running on a QFX5100

[Vasil Kanev]

thanks, and my second question is can a use ERPS on QFX, because the docs
says that "Ethernet ring protection switching uses connectivity fault
management daemon"

i`m little confused

On Mon, Oct 23, 2017 at 1:07 PM, Krasimir Avramski <krasi at smartcom.bg>
wrote:

> CFM is not supported on QFX family.
> ACX5K supports this feature.
>
> Best Regards,
> Krasi
>
> On 23 October 2017 at 12:39, Vasil Kanev <vasil.kanev at gmail.com> wrote:
>
>> Hi there,
>>
>> On an QFX5100 VC  i`m trying to configure OAM CFM but when i try to check
>> status i got this:
>>
>> error: the ethernet-connectivity-fault-management subsystem is not
>> running
>>
>> Here is my config:
>>
>> {master:0}[edit protocols oam ethernet connectivity-fault-management]
>> action-profile LINK_DOWN {
>>     default-actions {
>>         interface-down;
>>     }
>> }
>> maintenance-domain lab {
>>     level 7;
>>     name-format character-string;
>>     maintenance-association labMA {
>>         continuity-check {
>>             hold-interval 1;
>>         }
>>         mep 999 {
>>             interface xe-0/0/0.0 vlan 66;
>>             direction down;
>>             auto-discovery;
>>         }
>>     }
>> }
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>
>