[j-nsp] SRX - CPU utilization exceeds

[sameer mughal]

"packet mode" because we are configuring BGP and route map on this device.

On Wed, Sep 20, 2017 at 4:37 PM, sameer mughal <pcs.sameer1 at gmail.com>
wrote:

> Hi,
> Device is working in packet flow.
>
> On Wed, Sep 20, 2017 at 3:21 PM, Phil Mayers <p.mayers at imperial.ac.uk>
> wrote:
>
>> Datasheet numbers are often optimistic.
>>
>> Is the device forwarding in flow or packet mode? If flow mode, what type
>> of firewall services (appfw, IDP, etc.) and what is the session rate like?
>> What does the bytes/packet distribution look like?
>>
>> On 19 September 2017 08:47:51 WEST, sameer mughal <pcs.sameer1 at gmail.com>
>> wrote:
>> >Thanks a lot for the reply.
>> >
>> >However, as per the available SRX datasheet they can manage 300Mbps
>> >throughput so why it is showing high CPU in btw 60 to 70 Mbps. This is
>>
>> --
>> Sent from my mobile device, please excuse brevity and typos
>>
>
>