[j-nsp] SRX - CPU utilization exceeds
Damien.Luke at ac3.com.au
Wed Sep 20 09:17:31 EDT 2017
Are you sure? BGP and policy options don't require packet mode to be enabled.
What does `show security flow status` show under Inet forwarding mode?
From: juniper-nsp <juniper-nsp-bounces at puck.nether.net> on behalf of sameer mughal <pcs.sameer1 at gmail.com>
Sent: Wednesday, 20 September 2017 10:56 PM
To: Phil Mayers
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] SRX - CPU utilization exceeds
"packet mode" because we are configuring BGP and route map on this device.
On Wed, Sep 20, 2017 at 4:37 PM, sameer mughal <pcs.sameer1 at gmail.com>
> Device is working in packet flow.
> On Wed, Sep 20, 2017 at 3:21 PM, Phil Mayers <p.mayers at imperial.ac.uk>
>> Datasheet numbers are often optimistic.
>> Is the device forwarding in flow or packet mode? If flow mode, what type
>> of firewall services (appfw, IDP, etc.) and what is the session rate like?
>> What does the bytes/packet distribution look like?
>> On 19 September 2017 08:47:51 WEST, sameer mughal <pcs.sameer1 at gmail.com>
>> >Thanks a lot for the reply.
>> >However, as per the available SRX datasheet they can manage 300Mbps
>> >throughput so why it is showing high CPU in btw 60 to 70 Mbps. This is
>> Sent from my mobile device, please excuse brevity and typos
juniper-nsp mailing list juniper-nsp at puck.nether.net
More information about the juniper-nsp