[j-nsp] OSPF question

Andrey Khomyakov khomyakov.andrey at gmail.com
Thu Sep 21 19:47:35 EDT 2017


Sure you can. Run something like quagga on the server for OSPF, configure your 1g links as /31s. The key is to attach your service to a loop back IP on their server and advertise that loop back using quagga to your router. I'd also make each of the 1g links a point to point ospf type. 

-----------
Sent from mobile

> On Sep 21, 2017, at 19:25, joe mcguckin <joe at via.net> wrote:
> 
> I have a router with a 10G feed into a switch.
> I have a server with 2 1G ethernets connected to the same switch.
> Can I configure OSPF such that the router and server are neighbors and OSPF will perform ECMP load balancing 
> across the 2 1G ports?
> 
> Thanks,
> 
> Joe
> 
> 
> Joe McGuckin
> ViaNet Communications
> 
> joe at via.net
> 650-207-0372 cell
> 650-213-1302 office
> 650-969-2124 fax
> 
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp


More information about the juniper-nsp mailing list