[j-nsp] Going Juniper

[Colton Conor]

Mike,

For 20K you can get a new MX204 (not to be confused with MX240). However, I
don't think the MX204 support CGNAT if needed, but I could be wrong. But I
wouldn't touch a MX80 or MX104 if buying new.

On Mon, Apr 9, 2018 at 8:45 PM, <mike+jnsp at willitsonline.com> wrote:

> Greetings,
>
>     I am looking for some advice concerning juniper as an edge router.
>
>     I see there is a terrific amount of used mx104 and mx240 out there
> and the specs all seem great. What I'm looking to do is have 2x 10g
> feeds, route bgp, do flow exporting, and do a certain amount of ingress
> filtering to protect the network from ddos.Id even like to do cgnat for
> up to 5000 users but not sure if a single box setup would be wise.
>
>     I just don't have a handle on the various juniper platforms and
> route engine options. Love to keep this under $20,000 and get a load of
> 10g interfaces. Anyone here can tell me what I should be looking for?
>
> Mike-
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>