[j-nsp] Mounting a QFX5100 or ACX5048 on 2 Post Rack

[Nelson, Brian]

Yes, I have these kits in production, without the back cable mgmt rail.
Work just fine. They are beefier than the pictures depict.

Brian Nelson

On 08/02/2018 10:08 AM, Colton Conor wrote:
> Tim,
>
> Have you used this 2 post rack rails with the QFX5100? It looks like this
> rail kit has a back plate, does the power cables fit through those holes?
> This QFX5100 is long.
>
>
>
> On Wed, Aug 1, 2018 at 5:48 PM, Tim Jackson <jackson.tim at gmail.com> wrote:
>
>> https://www.racksolutions.com/2-post-rack-rails.html
>>
>> --
>> Tim
>>
>> On Wed, Aug 1, 2018 at 5:39 PM, Colton Conor <colton.conor at gmail.com>
>> wrote:
>>
>>> We are constantly having to mount these larger switches to two post racks.
>>> To my knowledge Juniper does not make 2 post mounting brackets for these
>>> switches. Does anyone have any recommendations on a shelf or something to
>>> hold these up? We are dealing with 19 and 23 inch racks.
>>> _______________________________________________
>>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>>
>>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


-- 
Supervisor
Computing Systems Support 
Dept of Computer Science