[j-nsp] Mounting a QFX5100 or ACX5048 on 2 Post Rack

[Colton Conor]

Brian, are you talking about this kit:
https://www.racksolutions.com/2-post-rack-rails.html



On Thu, Aug 2, 2018 at 11:25 AM, Nelson, Brian <brian.nelson at utdallas.edu>
wrote:

> Yes, I have these kits in production, without the back cable mgmt rail.
> Work just fine. They are beefier than the pictures depict.
>
> Brian Nelson
>
> On 08/02/2018 10:08 AM, Colton Conor wrote:
> > Tim,
> >
> > Have you used this 2 post rack rails with the QFX5100? It looks like this
> > rail kit has a back plate, does the power cables fit through those holes?
> > This QFX5100 is long.
> >
> >
> >
> > On Wed, Aug 1, 2018 at 5:48 PM, Tim Jackson <jackson.tim at gmail.com>
> wrote:
> >
> >> https://www.racksolutions.com/2-post-rack-rails.html
> >>
> >> --
> >> Tim
> >>
> >> On Wed, Aug 1, 2018 at 5:39 PM, Colton Conor <colton.conor at gmail.com>
> >> wrote:
> >>
> >>> We are constantly having to mount these larger switches to two post
> racks.
> >>> To my knowledge Juniper does not make 2 post mounting brackets for
> these
> >>> switches. Does anyone have any recommendations on a shelf or something
> to
> >>> hold these up? We are dealing with 19 and 23 inch racks.
> >>> _______________________________________________
> >>> juniper-nsp mailing list juniper-nsp at puck.nether.net
> >>> https://puck.nether.net/mailman/listinfo/juniper-nsp
> >>>
> >>
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
>
>
> --
> Supervisor
> Computing Systems Support
> Dept of Computer Science
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>