[j-nsp] LSP's with IPV6 on Juniper

[Tobias Heister]

Hi,

Am 27.08.2018 um 18:57 schrieb Olivier Benghozi:
> An yes, the MPLS control-plane uses only IPv4: (the intercos between routers are in IPv4, LDP uses IPv4, IGP uses IPv4, and IPv6 is really announced over specific AFI/SAFI (labeled unicast IPv6 for 6PE, VPNv6 for 6VPE) in IPv4 MP-iBGP sessions ; but it doesn't matter.

There is LDPv6 on Juniper since a couple of releases (i believe 16.x)
https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/configuring-ldp-native-ipv6-support.html

So in theory you could run IPv6 only control Plane (IGP, LDP, BGP) with MPLS Data Plane. As there is no 4PE you either need to do v4 in MPLS VPN/VRF or run v4 and v6 Control plane in parallel to get v4 across.
There is no v6 RSVP yet, but you might get your TE needs from SR/Spring.

-- 
Kind Regards
Tobias Heister