[j-nsp] LSP's with IPV6 on Juniper

[Olivier Benghozi]

For 6PE you have to:
- delete the iBGP ipv6 groups
- add family ipv6 labeled-unicast explicit-null to the IPv4 iBGP groups
- add ipv6-tunneling to protocol mpls.
- make sure your IGP is not advertising IPv6 addresses

This is the way it's configured, with either RSVP-TE or LDP.

> Le 29 août 2018 à 15:10, craig washington <craigwashington01 at hotmail.com> a écrit :
> 
> When I set this up in the lab (logical systems) and followed the Juniper documentation for setting up 6PE the IPV6 prefixes didn't resolve to LSP's.
> The documentation says to add labeled unicast with explicit null and tunneling.
> I had 2 groups, one for v4 and one for v6. I added the commands to v4 group and didn't see a change.
> I removed it all and tried adding it to v6 group and no change.
> The only way I got it to work was with mpls tunneling for v6 and on the export policy for the v6 group I changed the next hop from self to the v4 address of the advertising PE.