[j-nsp] SRX WAN DHCP

Eldon Koyle ekoyle+puck.nether.net at gmail.com
Mon Dec 10 10:39:49 EST 2018


The firmware that ships on the SRX is missing a lot of features.  I would
recommend upgrading to the latest version in that code train, which is
15.1X49-D150.

-- 
Eldon

On Mon, Dec 10, 2018 at 1:00 AM Mohammad Khalil <eng.mssk at gmail.com> wrote:

> Hello all
> I have an old SRX which I configured it is WAN IP address using the below
> command:
> set interfaces ge-0/0/0 unit 0 family inet address dhcp
>
> Now , I have replaced the box with a newer one (srx300 15.1X49-D70.3) but I
> cannot find the command itself
> I have tried the below:
> set interfaces ge-0/0/0 unit 0 family inet dhcp-client
> With no luck !
> When I try to check :
> show system services ? (no DHCP option is available)
> I have configured:
> set security zones security-zone untrust interfaces ge-0/0/0.0
> host-inbound-services dhcp
>
> Any ideas guys?
>
> BR,
> Mohammad
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


More information about the juniper-nsp mailing list