[j-nsp] SRX WAN DHCP

[Mohammad Khalil]

I cannot do the upgrade right now as I have to do the setup so quickly
What features should I enable ?

On Mon, 10 Dec 2018 at 17:40, Eldon Koyle <ekoyle+puck.nether.net at gmail.com>
wrote:

> The firmware that ships on the SRX is missing a lot of features.  I would
> recommend upgrading to the latest version in that code train, which is
> 15.1X49-D150.
>
> --
> Eldon
>
> On Mon, Dec 10, 2018 at 1:00 AM Mohammad Khalil <eng.mssk at gmail.com>
> wrote:
>
>> Hello all
>> I have an old SRX which I configured it is WAN IP address using the below
>> command:
>> set interfaces ge-0/0/0 unit 0 family inet address dhcp
>>
>> Now , I have replaced the box with a newer one (srx300 15.1X49-D70.3) but
>> I
>> cannot find the command itself
>> I have tried the below:
>> set interfaces ge-0/0/0 unit 0 family inet dhcp-client
>> With no luck !
>> When I try to check :
>> show system services ? (no DHCP option is available)
>> I have configured:
>> set security zones security-zone untrust interfaces ge-0/0/0.0
>> host-inbound-services dhcp
>>
>> Any ideas guys?
>>
>> BR,
>> Mohammad
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>