[j-nsp] SRX WAN DHCP

[Eldon Koyle]

I think the commands to check on the dhcp client are show dhcp client
binding and show dhcp client statistics.

There are a lot of bugs in -D70.

-- 
Eldon

On Mon, Dec 10, 2018 at 8:42 AM Mohammad Khalil <eng.mssk at gmail.com> wrote:

> I cannot do the upgrade right now as I have to do the setup so quickly
> What features should I enable ?
>
> On Mon, 10 Dec 2018 at 17:40, Eldon Koyle <
> ekoyle+puck.nether.net at gmail.com> wrote:
>
>> The firmware that ships on the SRX is missing a lot of features.  I would
>> recommend upgrading to the latest version in that code train, which is
>> 15.1X49-D150.
>>
>> --
>> Eldon
>>
>> On Mon, Dec 10, 2018 at 1:00 AM Mohammad Khalil <eng.mssk at gmail.com>
>> wrote:
>>
>>> Hello all
>>> I have an old SRX which I configured it is WAN IP address using the below
>>> command:
>>> set interfaces ge-0/0/0 unit 0 family inet address dhcp
>>>
>>> Now , I have replaced the box with a newer one (srx300 15.1X49-D70.3)
>>> but I
>>> cannot find the command itself
>>> I have tried the below:
>>> set interfaces ge-0/0/0 unit 0 family inet dhcp-client
>>> With no luck !
>>> When I try to check :
>>> show system services ? (no DHCP option is available)
>>> I have configured:
>>> set security zones security-zone untrust interfaces ge-0/0/0.0
>>> host-inbound-services dhcp
>>>
>>> Any ideas guys?
>>>
>>> BR,
>>> Mohammad
>>> _______________________________________________
>>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>>
>>