[j-nsp] MPC7E-MRATE - won't come online (enhanced-ip done)

[Litterick, Jeff (BIT)]

Last week I swapped out from DC Power to HC AC Power one of our MX960s and all 4 AC power Supplies came new out of the sealed shipping box from juniper with the dip switch in the 1 position and setup for 2 feed operation.

-----Original Message-----
From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Aaron Gould
Sent: Tuesday, December 18, 2018 4:46 PM
To: 'Sebastian Wiesinger' <sebastian at karotte.org>; juniper-nsp at puck.nether.net
Subject: Re: [EXT] [j-nsp] MPC7E-MRATE - won't come online (enhanced-ip done)

This one was interesting...the high capacity PEM's operate in 1700 w mode with what I think is the default dip switch position zero (0) as opposed to 1, which allows it to operate at 4100 w

{master}
agould at lab-960> show chassis power | grep "feed|PEM"

PEM 0:
  DC input:  OK (1 feed expected, 2 feed connected)

PEM 1:
  DC input:  OK (1 feed expected, 2 feed connected)

PEM 2:
  DC input:  OK (1 feed expected, 2 feed connected)

PEM 3:
  DC input:  OK (1 feed expected, 2 feed connected)


While I was trying to slot the MPC7E-MRATE card in slot 1 and 10, I got these messages about needing 465w but only 55 or 455 remaining...

{master}
agould at lab-960> show log chassisd | grep "requesting"
Dec 18 08:38:19  FPC 1 is requesting power (consumption) 465W, total remaining pwr 55 Dec 18 08:42:56  FPC 1 is requesting power (consumption) 465W, total remaining pwr 55 Dec 18 08:45:09  FPC 1 is requesting power (consumption) 465W, total remaining pwr 55 Dec 18 08:47:32  FPC 1 is requesting power (consumption) 465W, total remaining pwr 55 Dec 18 08:51:27  FPC 1 is requesting power (consumption) 465W, total remaining pwr 55 Dec 18 08:52:01  FPC 1 is requesting power (consumption) 465W, total remaining pwr 55 Dec 18 08:56:24  FPC 1 is requesting power (consumption) 465W, total remaining pwr 55 Dec 18 08:58:41  FPC 1 is requesting power (consumption) 465W, total remaining pwr 55 Dec 18 14:19:01  FPC 1 is requesting power (consumption) 465W, total remaining pwr 55 Dec 18 14:19:01  FPC 10 is requesting power (consumption) 465W, total remaining pwr 455

{master}
agould at lab-960> show chassis power | find "System"
System:
  Zone 0:
      Capacity:          1700 W (maximum 4100 W)
      Allocated power:   1245 W (455 W remaining)
      Actual usage:      576 W
  Zone 1:
      Capacity:          1700 W (maximum 4100 W)
      Allocated power:   1645 W (55 W remaining)
      Actual usage:      846 W
  Total system capacity: 3400 W (maximum 8200 W)
  Total remaining power: 510 W

So apparently the MPC7E-MRATE needs 465 watts to boot, and it didn't find enough power.

{master}
agould at lab-960> show chassis alarms
7 alarms currently active
Alarm time               Class  Description
2018-12-17 13:01:27 CST  Minor  PEM 0 Dipswitch 0 Feed Connection 2
2018-08-07 10:35:40 CDT  Minor  PEM 3 Dipswitch 0 Feed Connection 2
2018-08-07 10:35:20 CDT  Minor  PEM 2 Dipswitch 0 Feed Connection 2
2018-08-07 10:35:20 CDT  Minor  PEM 1 Dipswitch 0 Feed Connection 2

it was trying to tell me that I have 2 power feeds and the dip switch is set to only allow 1.


-Aaron

https://www.juniper.net/documentation/en_US/release-independent/junos/topics
/task/installation/power-supply-mx960-high-capacity-dc-connecting.html

https://www.juniper.net/documentation/en_US/release-independent/junos/topics
/task/troubleshooting/power-supply-mx960.html 

https://kb.juniper.net/InfoCenter/index?page=content&id=KB19824&cat=MX960_1&
actp=LIST 

https://kb.juniper.net/InfoCenter/index?page=content&id=KB26721&cat=MX960_1&
actp=LIST

-----------------------------------------

I just found out that there is a dip switch on the back of my high-capacity PEM's that needs to be flipped from 0 to 1 for the additional power feed I have going into it.  Show log chassisd shows my fpc asking for power but my system doesn't have enough.

-Aaron

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp