[j-nsp] dhcp relay fail between VRFs

[Aaron1]

I use the per-vrf dhcp-relay in ACX5048

Aaron

> On Dec 19, 2018, at 5:41 PM, Chris Cappuccio <chris at nmedia.net> wrote:
> 
> Nathan Ward [nward at daork.net] wrote:
>> Hi Chris, check out the forward-only-replies option, pretty sure there was some stuff there I had to fiddle with.
>> 
>> Can you post your config?
>> 
> 
> I'm using the bootp helper instead of the dhcp-relay feature. I don't know
> if 'fud' handles both. When I tried using dhcp-relay, my remote PEs stopped
> receiving DHCP replies. The router connected to the dhcp server would eat the
> replies and they would never reach the remote PE router, despite the
> interface that the DHCP server connects to not having any relay enabled.
> Since it is a production network I stopped using dhcp-relay until I look
> further into the documentation..
> 
> Chris
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp