[j-nsp] MX204 Tunnel Services

[Tim Jackson]

I've done LT interfaces on MX204 with multiple LSYS' to build some lab
topologies without issue. This was back in beta and worked fine, haven't
run it on newer code, but I do run GRE tunnels in 18.1R3 without issue.

--
Tim



On Wed, Dec 26, 2018, 5:43 PM Fraser McGlinn <fraser at frizianz.com wrote:

> Hey Everyone,
>
> Yet another post re MX204 ;)
>
> Trying to get lt-x/x/x interfaces working on MX204 (18.3R1.9), thus far no
> luck. Interfaces are created and bandwidth set after enabling tunnel
> services on the PIC, however only output packets on the source interface
> increment. Input packets do not increment on the receiving unit, so seems
> to get lost in the nether.
>
> Has anyone got LT interfaces working on MX204 and an example config?
>
> Cheers,
> Fraser
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>