[j-nsp] SNMP_EVLIB_FAILURE - snmp not working anymore

[Amarjeet Singh]

Sending with correct subject-line.


> On 30 Dec 2018, at 4:59 pm, Amarjeet Singh <techie.logging at gmail.com> wrote:
> 
>  
> I do agree with Emille, feel free to hit provide feedback for documentation.
> 
> I would recommended to disable periodic-refresh for BBE.
> There is KB which explains this.
> 
> https://kb.juniper.net/InfoCenter/index?page=content&id=KB27474 <https://kb.juniper.net/InfoCenter/index?page=content&id=KB27474>
> 
> set accounting-options periodic-refresh disable 
> 
> Periodic-refresh is disabled to change the default behavior for statistics collection. Before Broadband Edge (BBE), statistics were constantly collected by Junos. This consumes CPU cycles that are needed by BBE for call setup. So, an option to only collect statistics on demand was needed. Disabling periodic refresh makes the change in statistics collection to on demand. There is no negative impact to statistics accuracy or rate when set this way.
> 
> Br, Amarjeet
>